1999 Buick Park Avenue anti lock & traction control lights.
1999 Buick Park Avenue anti lock & traction control lights.
The anti lock and traction control lights come on after the car driven about 100'. No trouble codes. Where should I look first?
Re: 1999 Buick Park Avenue anti lock & traction control lights.
If the ABS light is on, then code(s) are stored in the computer. If you had a free scan at a parts store or repair shop, they do not usually scan the ABS computer. They only scan the Powertrain module (PCM), so no code would show up. You need to get the ABS computer scanned for codes. Then we can help with the problem. Too many possibilities.
Re: 1999 Buick Park Avenue anti lock & traction control ligh
Most common cause for the ABS and Traction light is a bad wheel speed sensor. The front are most common. The sensor is part of the wheel bearing hub. Also be sure to check the wiring to the sensor. We have seen many times a broken wire cause intermittant lights that may not set a code.
Be Sure To Check The Related Topics below For More Help.
my 2002 buick lesabre ABS Traction
I hit a very large pothole and my "abs" light and traction control off light came on. Now it's telling Me system needs stability. I don't know what to do.
Re: my 2002 buick lesabre ABS Traction
you need to have your anti-lock brake module scanned. You may have set a code when you hit the pothole if the wheel speed changed from what the other three wheels were reading. You may have damaged a wheel speed sensor or wiring.
if you hook up to a scanner you can see what the code is and you can drive the car and watch the wheel speed sensors to see if one of them isn't working as the others.
when the abs or traction lights come on it means that these systems have seen a code and are now disabled. Normal braking should still be ok. Key word there is "should". I don't know how big that pothole was...
if you hook up to a scanner you can see what the code is and you can drive the car and watch the wheel speed sensors to see if one of them isn't working as the others.
when the abs or traction lights come on it means that these systems have seen a code and are now disabled. Normal braking should still be ok. Key word there is "should". I don't know how big that pothole was...
Browse "SIMILAR TOPICS" At The Bottom Of This Page.
Re: my 2002 buick lesabre ABS Traction
Everything seems to be working just fine breaks squeak a little. Seeing the lights on really bothers me. Where can I go to have the code read.
Re: my 2002 buick lesabre ABS Traction
Almost any auto repair shop would have a scanner that could look at the codes and let you know what is turning the light on. Some auto parts places will scan your vehicle for free because they want to sell you parts but most of the time they don't know what the codes really mean. Unless the code simply syates a part is damaged, there will be some diagnostic time involved in figuring out why the light came on.
Browse "SIMILAR TOPICS" At The Bottom Of This Page.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 11338 Views
-
Last post by carriedi
Tue Dec 27, 2016 3:22 am
-
- 1 Replies
- 7990 Views
-
Last post by carriedi
Fri Nov 07, 2014 8:02 pm
-
- 1 Replies
- 13798 Views
-
Last post by carriedi
Wed Mar 17, 2021 11:37 pm
-
- 2 Replies
- 11871 Views
-
Last post by KaylaAnneKay
Sun Dec 06, 2015 9:28 pm
-
- 1 Replies
- 8418 Views
-
Last post by carriedi
Tue Aug 05, 2014 11:23 pm