02 silhouette
02 silhouette
I have an 02 silhouette. I have changed the fuel pump , filter anf relay and it still wont turn over. Yes its getting fuel we did the fuel pressure test. Can someone please help me.
Re: 02 silhouette
how much fuel pressure does it have? why did you do the fuel pump, filter and relay?
when you say it won't turn over do you mean the engine won't start or do you meay that the starter doesn't crank the engine over? Won't turn over means that the engine is not rotating when you turn the key to the start position. If that is the case you would need to look at the starter, starter relay, battery, neutral safety switch and the ignition switch. If you mean it turns over (rotates by means of the starter) but won't start, you have to verify your fuel pressure is up to spec, you have ignition spark and injector pulse when you are cranking.
when you say it won't turn over do you mean the engine won't start or do you meay that the starter doesn't crank the engine over? Won't turn over means that the engine is not rotating when you turn the key to the start position. If that is the case you would need to look at the starter, starter relay, battery, neutral safety switch and the ignition switch. If you mean it turns over (rotates by means of the starter) but won't start, you have to verify your fuel pressure is up to spec, you have ignition spark and injector pulse when you are cranking.
Browse "SIMILAR TOPICS" At The Bottom Of This Page.
Re: 02 silhouette
We changed the fuel filter cuz we thought it was clogged and it still didnt work so we tried the relay and then we changed the pump with a new one and it still wont stat like to put in drive. It cranks but it wont go. Im not sure how much the pressure was but I can see and how much should the pressure be?
Re: 02 silhouette
fuel pressure should be 52 to 59 psi.
ok, I am still a little confused. maybe it the terminology. when you turn the key to the start position, is the engine turning over? (starter engaging the engine and cranking the engine making it rotate, turn over) If the engine does turn over does it ever start up? Does is start up and then stall out or does it never start up, just cranks only?Understanding what is actually happening is key into figuring out what is going on
ok, I am still a little confused. maybe it the terminology. when you turn the key to the start position, is the engine turning over? (starter engaging the engine and cranking the engine making it rotate, turn over) If the engine does turn over does it ever start up? Does is start up and then stall out or does it never start up, just cranks only?Understanding what is actually happening is key into figuring out what is going on
Browse "SIMILAR TOPICS" At The Bottom Of This Page.
Re: 02 silhouette
I got it fixed it was the crank sensor. Thank you. It would turn over but never start. the starter was engaging but after some trial and error it was the crank sensor
Re: 02 silhouette
yep, no crank sensor signal and you get no spark and injector pulse to run. Congrats on getting it fixed
Browse "SIMILAR TOPICS" At The Bottom Of This Page.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 14450 Views
-
Last post by carriedi
Sun Jun 20, 2021 3:46 pm
-
- 3 Replies
- 8697 Views
-
Last post by carriedi
Wed Mar 22, 2017 12:19 am
-
-
New post ICM burn up 99 Olds silhouette 3.4
by rschneider » Thu Dec 22, 2016 5:29 pm » in Oldsmobile - 2 Replies
- 6710 Views
-
Last post by andrewandrew
Thu Dec 28, 2017 4:45 pm
-
-
- 1 Replies
- 5718 Views
-
Last post by carriedi
Sat Mar 12, 2016 1:57 pm
-
-
New post Oldsmobile silhouette Ignition switch burned up
by janinep46 » Tue Jan 26, 2016 11:57 pm » in Oldsmobile - 2 Replies
- 6590 Views
-
Last post by janinep46
Wed Jan 27, 2016 1:39 am
-