Chrysler over heating parts replaced

Ask our auto mechanics for help to all your Dodge and Chrysler questions.
Dillinger
Posts: 1
Joined: Sun Mar 17, 2013 6:15 am

1997 Dodge stratus BCM location

Unread post by Dillinger » Sun Mar 17, 2013 6:24 am

need to find the BCM on a 1997 Dodge stratus cant find it in the vehicle :(

User avatar
ProTech
Posts: 642
Joined: Wed Oct 17, 2012 10:08 am

Re: 1997 Dodge stratus BCM location

Unread post by ProTech » Sun Mar 17, 2013 5:09 pm

It's located under the dash, near or bolted to the inside fuse block.
GM Dealer Technician For 18+ Years
In the automotive industry for 20+

russell.pendleton2
Posts: 1
Joined: Sun Apr 14, 2013 10:56 am

problem with camshaft and cylinder head

Unread post by russell.pendleton2 » Sun Apr 14, 2013 11:02 am

The camshaft seal blew clear out of the head and when i got it apart i looked into the head around the cam and whatever the seal sits flush against looks broke what is that and can it break or is it supposed to look yhat way

User avatar
ProTech
Posts: 642
Joined: Wed Oct 17, 2012 10:08 am

Re: problem with camshaft and cylinder head

Unread post by ProTech » Sun Apr 14, 2013 9:14 pm

If you can tell me the year and model of the car, and the engine size, I can help you.
GM Dealer Technician For 18+ Years
In the automotive industry for 20+

rtann47
Posts: 1
Joined: Fri Mar 28, 2014 2:20 pm

Chrysler over heating parts replaced

Unread post by rtann47 » Fri Mar 28, 2014 2:30 pm

87 Chrysler town and country over heating.
I know the list as to why a car may over heat is very long. I have in the last year replaced the rad and hoses put in a new thermostat BUT still it over heats. While driving it today the car over heated going into the red. I turned the heater up full and very cold air came instead of hot. My ? is could my car need a new fan or maybe a water pump?

ArronBurns
Posts: 2
Joined: Fri Mar 28, 2014 7:34 pm

Re: Chrysler over heating parts replaced

Unread post by ArronBurns » Fri Mar 28, 2014 7:45 pm

If you have no heat in the cab and your engine is overheating than your coolant level is low or you have an airlock in the system. You may have an internal engine problem. I do not guarantee any repairs on an engine that has been overheated as the possibility of internal damage is very high. I recommend having it inspected by a professional.

Scott21
Posts: 3
Joined: Thu Dec 18, 2014 4:42 am

Chrysler 300c has no fuel pedal

Unread post by Scott21 » Thu Dec 18, 2014 4:48 am

My 2006 chrysler 300c 5.7l start hard will idle but has no fuel pedal I've changed crankshaft position sensor throttle body pedal sensor not sure what to do next

User avatar
carriedi
Posts: 2517
Joined: Wed Apr 10, 2013 12:42 pm

Re: Chrysler 300c has no fuel pedal

Unread post by carriedi » Thu Dec 18, 2014 11:21 am

you should use a scanner and look at the throttle data. is the check engine light on? have you checked for codes?

Scott21
Posts: 3
Joined: Thu Dec 18, 2014 4:42 am

Re: Chrysler 300c has no fuel pedal

Unread post by Scott21 » Thu Dec 18, 2014 11:46 am

Right now my 300c is showing 3 codes p0335 p0406 &p0403 again I changed the crankshaft position sensor the throttle body & pedal sensor

Scott21
Posts: 3
Joined: Thu Dec 18, 2014 4:42 am

Re: Chrysler 300c has no fuel pedal

Unread post by Scott21 » Thu Dec 18, 2014 1:51 pm

Just talked to chrysler dealer they said after changing these parts I have to get the computer relearned let u know how that goes

User avatar
carriedi
Posts: 2517
Joined: Wed Apr 10, 2013 12:42 pm

Re: Chrysler 300c has no fuel pedal

Unread post by carriedi » Fri Dec 19, 2014 2:29 am

yes, the pedal and throttle body should be relearned after installation. Otherwise the computer won't run normally. It wants them both sync'd up. why did you replace them? Usually when they have a problem you will have a code for that and the vehicle will run but in a very limited mode. (just barely able to get you home) (codes like a p0122,123,124 or something like that)

the codes should be cleared and see what codes return.

p0335 is for the crank sensor,
p0406 is for egr position sensor circuit high
p0403 is for egr solenoid circuit.

dafaa45
Posts: 2
Joined: Wed Apr 08, 2015 7:06 am

Re: Chrysler 300c has no fuel pedal

Unread post by dafaa45 » Wed Apr 08, 2015 7:10 am

It wants them both sync'd up. why did you replace them???

  • Similar Topics
    Replies
    Views
    Last post