07 saturn aura xe 3.5

Ask our auto mechanics for help to all your Saturn questions.
3bauto
Posts: 1
Joined: Tue Jan 14, 2014 3:27 pm

07 saturn aura xe 3.5

Unread post by 3bauto » Tue Jan 14, 2014 3:39 pm

trouble code p0641 and will not start key switch intermitted on crank. when you unplug the map sensor it starts and runs and shows power reduced, traction control, and the oil light on the dash.

User avatar
carriedi
Posts: 2573
Joined: Wed Apr 10, 2013 12:42 pm

Re: 07 saturn aura xe 3.5

Unread post by carriedi » Wed Jan 15, 2014 11:55 am

since you have a scanner that can scan for codes, does it have the ability to look at the data stream? the code P0641 is telling you that you have lost the 5 volt reference signal to a circuit. If it starts when you unplug the MAP, that could well be your problem. Running your engine without the map will turn the check engine light on and run on limp in mode. Check the connector terminals to the map sensor for having 5 volt reference when it is unplugged from the sensor. check that same wire for 5 volts when you plug the connector onto the map. Does it still have 5 volts or does the voltage drop down? If it drops down (lowering the reference voltage) it will affect every other sensor on that circuit.
Browse "SIMILAR TOPICS" At The Bottom Of This Page.

  • Similar Topics
    Replies
    Views
    Last post