Antenna Replace

Post Reply New Topic
njk19988
Posts: 1
Joined: Fri Mar 04, 2016 2:02 pm

Antenna Replace

Unread post by njk19988 » Fri Mar 04, 2016 2:07 pm

Antennae will not retract/extend, motor heard running, bought a new mast.
How do I remove the old mast? There seems to be no way to get it out of the motor mount.
Attachments
IMG_2924.JPG
Heres a look at the stuck mast in the motor mount
IMG_2924.JPG (126.53 KiB) Viewed 1247 times


User avatar
carriedi
Posts: 2265
Joined: Wed Apr 10, 2013 12:42 pm
Location: Oregon

Re: Antenna Replace

Unread post by carriedi » Sat Mar 05, 2016 2:36 am

you have to pull the old mast out while the motor is trying to raise the mast. When you turn the radio on and you hear the motor going, pull the mast out. (provided you have removed the mast nut that holds the mast in) If the mast doesn't move out grab the antenna shaft that is sticking out with a pliers of vice grip. Don't worry about damaging the shaft because you are replacing it anyways. (Only pull it while the motor is running, trying to raise the antenna) You may have to use a pliers or vise grip and hammer on it to pull the mast up. They do get stuck.

https://www.youtube.com/watch?v=pwKkA0s5jlQ

https://www.youtube.com/watch?v=IHEN55oXLgo
Browse "SIMILAR TOPICS" At The Bottom Of This Page.

Post Reply New Topic
  • Similar Topics
    Replies
    Views
    Last post