fuse #9 blows on acceleration ECM/VCM, ABS, fuel pump
need help with wiring problem
ok my gf has a 1997 s10 and when she kicked her ex out he had took something off and he will not tell us what it is i was wondering if anyone could help me and the truck was actually made in late of 96 all i need is a few pics of a 96-97 2.2 motor and wires that would help alot thanx
Re: need help with wiring problem
Better if you send me some pics of your motor and I can tell you if something is missing.
Send me a PM.
Send me a PM.
Click here to make a SMALL DONATION to HELP KEEP US FREE
Re: need help with wiring problem
What exactly is the problem with your truck? Does it not run anymore or crank. If you could tell us what the problem is with your Chevy we might be able to tell you what was taken off just by the problem you are having. Let us know if there is a check engine light on or some other condition.
fuse #9 blows on acceleration ECM/VCM, ABS, fuel pump
1995 S10 keeps blowing 20A fuse #9 which says ECM/VCM, ABS, FUEL PUMP. I have replaced fuel pump and relay, same issue. Will a bad ECM cause the fuse to blow on acceleration? Replace fuse, starts right up. Go to accelerate, fuse blows. disconnected ABS, same issue. I was leaning towards the coil but not sure that would cause the fuse to blow. Seems to work fine until well heated, then fuse blows upon acceleration.
Re: fuse #9 blows on acceleration ECM/VCM, ABS, fuel pump
Could be a computer, I've seen them do some strange things. I would first check all circuits that the fuse controls for any wiring problems such as a short to ground or voltage. Harnesses can rub through over the years, wires can chafe, grounds can corrode, etc. The problem happening when warm tends to lean towards a component issue, but you never know. Usually things like the computer, coil, ignition module, etc...can be affected by temperature, so it may be something like that.
GM Dealer Technician For 18+ Years
In the automotive industry for 20+
In the automotive industry for 20+
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 90049 Views
-
Last post by carriedi
Tue Mar 22, 2022 2:53 pm
-
- 5 Replies
- 7035 Views
-
Last post by carriedi
Fri Aug 22, 2014 3:07 pm
-
- 2 Replies
- 11368 Views
-
Last post by jimmythunder
Tue Mar 08, 2022 1:26 pm
-
-
New post no power to coil and fuel pump, no start
by dennislamb » Tue Jul 12, 2016 12:40 pm » in Dodge And Chrysler - 1 Replies
- 4885 Views
-
Last post by carriedi
Tue Jul 12, 2016 8:23 pm
-