Chrysler Town and Country won't start

Ask our auto mechanics for help to all your Dodge and Chrysler questions.
Post Reply
dw85745
Posts: 8
Joined: Fri Feb 12, 2016 12:34 pm

Re: Chrysler Town and Country won't start

Unread post by dw85745 » Fri Feb 12, 2016 12:53 pm

Personally I would check the battery first. If the battery is over 3 years old OR your in cold weather, most likely the battery.
If you have a VOM or DVOM, check if battery has greater than 12.6 volts. If lower, < 12.0 then battery.
Top
dw85745
Posts: 8
Joined: Fri Feb 12, 2016 12:34 pm

Re: Chrysler Town and Country won't start

Unread post by dw85745 » Mon Feb 15, 2016 9:37 pm

Don't have a 12V test light.
Pull the license plate light bulb, solder or tape a couple wires to the bulb, and use it.
Top
GUEST

Re: Chrysler Town and Country won't start

Unread post by GUEST » Wed Oct 13, 2021 10:33 am

Same one click noise and also not moving when shifted into neutral. I replaced the starter and transmission already.
Top
User avatar
carriedi
Posts: 2447
Joined: Wed Apr 10, 2013 12:42 pm

Re: Chrysler Town and Country won't start

Unread post by carriedi » Wed Oct 13, 2021 5:08 pm

where is the "one click" coming from? Is it the starter solenoid clicking? If the click is coming from the fuse box I would think it would be the starter relay.

I am not sure why you said not moving when shifted into neutral. The vehicle won't move when it's in neutral unless you're on a hill or you push it. In neutral the vehicle just sits there.

you need to see if you are getting battery power to the starter solenoid.
Top
Post Reply

  • Similar Topics
    Replies
    Views
    Last post

Return to “Dodge And Chrysler”