Chrysler over heating parts replaced
1997 Dodge stratus BCM location
need to find the BCM on a 1997 Dodge stratus cant find it in the vehicle :(
Re: 1997 Dodge stratus BCM location
It's located under the dash, near or bolted to the inside fuse block.
GM Dealer Technician For 18+ Years
In the automotive industry for 20+
In the automotive industry for 20+
-
- Posts: 1
- Joined: Sun Apr 14, 2013 10:56 am
problem with camshaft and cylinder head
The camshaft seal blew clear out of the head and when i got it apart i looked into the head around the cam and whatever the seal sits flush against looks broke what is that and can it break or is it supposed to look yhat way
Re: problem with camshaft and cylinder head
If you can tell me the year and model of the car, and the engine size, I can help you.
GM Dealer Technician For 18+ Years
In the automotive industry for 20+
In the automotive industry for 20+
Chrysler over heating parts replaced
87 Chrysler town and country over heating.
I know the list as to why a car may over heat is very long. I have in the last year replaced the rad and hoses put in a new thermostat BUT still it over heats. While driving it today the car over heated going into the red. I turned the heater up full and very cold air came instead of hot. My ? is could my car need a new fan or maybe a water pump?
I know the list as to why a car may over heat is very long. I have in the last year replaced the rad and hoses put in a new thermostat BUT still it over heats. While driving it today the car over heated going into the red. I turned the heater up full and very cold air came instead of hot. My ? is could my car need a new fan or maybe a water pump?
-
- Posts: 2
- Joined: Fri Mar 28, 2014 7:34 pm
Re: Chrysler over heating parts replaced
If you have no heat in the cab and your engine is overheating than your coolant level is low or you have an airlock in the system. You may have an internal engine problem. I do not guarantee any repairs on an engine that has been overheated as the possibility of internal damage is very high. I recommend having it inspected by a professional.
Chrysler 300c has no fuel pedal
My 2006 chrysler 300c 5.7l start hard will idle but has no fuel pedal I've changed crankshaft position sensor throttle body pedal sensor not sure what to do next
Re: Chrysler 300c has no fuel pedal
you should use a scanner and look at the throttle data. is the check engine light on? have you checked for codes?
Re: Chrysler 300c has no fuel pedal
Right now my 300c is showing 3 codes p0335 p0406 &p0403 again I changed the crankshaft position sensor the throttle body & pedal sensor
Re: Chrysler 300c has no fuel pedal
Just talked to chrysler dealer they said after changing these parts I have to get the computer relearned let u know how that goes
Re: Chrysler 300c has no fuel pedal
yes, the pedal and throttle body should be relearned after installation. Otherwise the computer won't run normally. It wants them both sync'd up. why did you replace them? Usually when they have a problem you will have a code for that and the vehicle will run but in a very limited mode. (just barely able to get you home) (codes like a p0122,123,124 or something like that)
the codes should be cleared and see what codes return.
p0335 is for the crank sensor,
p0406 is for egr position sensor circuit high
p0403 is for egr solenoid circuit.
the codes should be cleared and see what codes return.
p0335 is for the crank sensor,
p0406 is for egr position sensor circuit high
p0403 is for egr solenoid circuit.
Re: Chrysler 300c has no fuel pedal
It wants them both sync'd up. why did you replace them???
-
- Similar Topics
- Replies
- Views
- Last post
-
-
New post Chrysler Town and Country won't start
by RANDALL25 » Tue Jan 12, 2016 1:53 pm » in Dodge And Chrysler - 12 Replies
- 33603 Views
-
Last post by carriedi
Wed Oct 13, 2021 5:08 pm
-