94 dodge ram B250 van engine stalling

Ask our auto mechanics for help to all your Dodge and Chrysler questions.
denise
Posts: 1
Joined: Tue Feb 05, 2013 10:20 pm

94 dodge ram B250 van engine stalling

Unread post by denise » Tue Feb 05, 2013 10:35 pm

has any body had this promblem with their 1994 dodge ram B250 Van . it ran fine untill i had the radiater thermostat and u joints replaced . then i went out to test drive the van and after a couple of blocks i came to a red light and when i tried to turn the corner after the light changed to green the van stalled and died. it will now startand idle but will the engine will stall if i put it in to drive or reverse. can any one give me an idea what is causing this. or has any one had a recall for vapor cannister and purge solenoid for 94 B250 dodge ram van. :|

User avatar
Karl
Posts: 83
Joined: Thu Oct 11, 2012 3:43 pm

Re: 94 dodge ram B250 van engine stalling

Unread post by Karl » Wed Feb 06, 2013 11:50 pm

First of all you need to take it back to who did the work. They messed something up. Sounds like they left off a vacuum line or broke one.

That would cause it run very lean ann stall at or coming to an idle. A vacuum leak would not effect it running down the road.
Read some SIMILAR questions down below for more help.
Check out our Photo Gallery

  • Similar Topics
    Replies
    Views
    Last post