All times are UTC - 6 hours [ DST ]




Ask A Question Reply   
Author Message
 

contributions: 5
what causes 1999 Honda odyessy to vibrate at idle and grinding noise,after the oil seal,waterpump and timing belt was replaced?


   
Reply with quote  
* Search   
 
User avatar

contributions: 2275
Images: 37
Location: Oregon
who did the oil seal and water pump? have you taken it back to them and asked if they would check out your concerns? if it didn't do that before the work was done maybe something is off. double check the timing belt alignment. Idle too low, belt off a tooth, bad engine mount are things that could cause a vibration at idle. Grinding would be something rubbing or dragging. A bad part? Sometimes even a new part can be bad... Here is an example:

https://www.youtube.com/watch?v=dJJujul ... Y0wF2o5WUw

Not saying this is what is wrong with your car but you should have it checked by the person or place that did your work before you do anything else.


   
Reply with quote  
 

contributions: 5
carriedi,thankyou for the response,exactly my thoughts,are goin to recheck all at the garage,thanks,naf


   
Reply with quote  
 

contributions: 5
seems the problem was the tension on the timing belt,new arm and pulley ,put Honda part in ,so far so good


   
Reply with quote  
 
User avatar

contributions: 2275
Images: 37
Location: Oregon
I'm happy that they found out what was making the noise for you. Like the video I posted, sometimes things just happen


   
Reply with quote  
 

contributions: 22
Quote:
I'm happy that they found out what was making the noise for you. Like the video I posted, sometimes things just happen


yeah right, things just happened. I'm glad to know it's working good!


   
Reply with quote  
 

contributions: 5
Grinding - Stop driving! Usually caused by a lack of brake pad.
Thumping from rear - Hard to diagnose, but usually the rear drums.
Squeaking - Either cheap brake pads or break wear indicator is hitting rotor.
Thumping or squealing - If car is parked outdoors, probably caused by rusted rotors.
Scraping - You may have picked up a rock.


   
Reply with quote  
Ask A Question Reply   

   Similar Topics   Author   Replies   Views   Most Recent 
New Articles View the first 2003 Chevy grinding noise

in Chevy Silverado

jwcarter2006

1

1969

Thu Dec 18, 2014 11:27 am

carriedi View the latest

New Articles View the first 2007 Chevy Impala grinding noise

in Chevy Cars

trt818

4

4580

Sat Mar 23, 2013 7:14 pm

eddie197644 View the latest

New Articles View the first Vibration

in GMC Trucks

Orlando

1

785

Thu Jan 18, 2018 10:13 pm

carriedi View the latest

New Articles View the first 97 Grand Prix GTP grinding at low RPM

in Pontiac Grand Prix

SVick83

6

3342

Sun Dec 30, 2012 8:47 pm

SVick83 View the latest

New Articles View the first Front end humming/vibration

in Chevy Trailblazer

kwall639

1

670

Wed Aug 01, 2018 12:28 am

carriedi View the latest

New Articles View the first Attachment(s) 2004 GMC Envoy vibration while idling

[ Go to page: 1, 2 ]

in GMC Trucks

RKereliuk

9

23809

Mon Mar 04, 2013 9:12 am

ProTech View the latest

New Articles View the first Chevy Cavalier A/C grinding question

in Chevy Cars

scotttt1970

2

1410

Thu Feb 21, 2013 9:29 pm

scotttt1970 View the latest


All times are UTC - 6 hours [ DST ]



Search for:
Jump to:  
Contact Us