03 Ford expedition trac light

Ask our auto mechanics for help to all your Ford truck questions now.
Post Reply New Topic
Andre

03 Ford expedition trac light

Unread post by Andre » Tue Nov 12, 2019 3:46 pm

I have 03 expedition and my traction control/stability light is flashing and I believe my 4x4 isn't working due to that. Now when I change it to 4x4L I do feel the vehicle jerk as it should but still doesn't feel like 4x4 is working properly because I'm still fish tailing....what can I do or fix

User avatar
carriedi
Posts: 2288
Joined: Wed Apr 10, 2013 12:42 pm
Location: Oregon

Re: 03 Ford expedition trac light

Unread post by carriedi » Tue Nov 12, 2019 10:07 pm

you should have your vehicle scanned to see if codes are stored that could be the cause of your problems. A wheel speed sensor may not be sending the correct signal. drive with the scanner monitoring the speed sensors and see it they all read the same speed with no signal drop outs.

you can scan the transfer case to check on the 4wd unit. Switches go bad, transfer case shift motors go bad could be vacuum line not passing vacuum or leaking vacuum.

Post Reply New Topic
  • Similar Topics
    Replies
    Views
    Last post