Operation of VSES on 2011 GMC Sierra 5.3
Re: Operation of VSES on 2011 GMC Sierra 5.3
you should have the vehicle scanned for codes. there should be codes stored for the times the light came on. There are a lot of different things that can cause this message to pop up. The code stored in the EBCM should tell you what direction you need to go.
codes can lead you to ABS enable relay (EBCM) to wheel speed sensor. Without reading the codes you aren't going to be able to know what is happening. Especially if it's intermittent.
find out what the codes are and let me know. Intermittent warning light thast comes on and then goes off usually means the condition corrected it self. So, the code stored is the only way to run it down
codes can lead you to ABS enable relay (EBCM) to wheel speed sensor. Without reading the codes you aren't going to be able to know what is happening. Especially if it's intermittent.
find out what the codes are and let me know. Intermittent warning light thast comes on and then goes off usually means the condition corrected it self. So, the code stored is the only way to run it down
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5 Replies
- 20547 Views
-
Last post by carriedi
Sat Apr 18, 2015 10:56 pm
-
- 1 Replies
- 11340 Views
-
Last post by carriedi
Mon Oct 30, 2017 11:26 pm
-
-
New post GMC 2001 Sierra does not always start!
by rkcrump » Wed Oct 19, 2016 8:37 pm » in GMC Trucks - 1 Replies
- 11197 Views
-
Last post by carriedi
Wed Oct 19, 2016 10:54 pm
-
-
-
New post 97 Sierra, lost turn signals and hazard lights
by racinjasonparker » Mon Jan 21, 2019 4:25 am » in GMC Trucks - 1 Replies
- 19799 Views
-
Last post by carriedi
Mon Jan 21, 2019 11:02 pm
-