Gmc envoy

Ask our auto mechanics for help to all your GMC truck questions.
Post Reply New Topic
Dwhid64
Posts: 1
Joined: Fri Apr 06, 2018 6:35 am

Gmc envoy

Unread post by Dwhid64 » Fri Apr 06, 2018 6:39 am

Check engine light on its reading misfire on cylinder2 i tried everything pretty much,new plugs new coil pack new injectors, dont know wat else it could be please help thx.

User avatar
carriedi
Posts: 2282
Joined: Wed Apr 10, 2013 12:42 pm
Location: Oregon

Re: Gmc envoy

Unread post by carriedi » Fri Apr 06, 2018 9:34 am

if the p0302 is the only code and you have done the plug, coil and injector you should look and compare to a known good cylinder, what the electrical wave forms look like. If the injector looks like another injector and the coil looks like another coil then you may have a mechanical problem with that cylinder. you may want to do a cylinder leakdown test and see if your valves are fully closing.
Browse "SIMILAR TOPICS" At The Bottom Of This Page.

Post Reply New Topic
  • Similar Topics
    Replies
    Views
    Last post