I am 16 and have a 1995 gmc k1500 5.7 it pulsates at idle and stalls, so far I have a new cap, rotor, module, wires, plugs, maf sensor, throttle position sensor, fuel pump and pressure reading is 13 to 15 pounds. Thermostat sensor for computer. It still pulsates after computer is bringing down idle and then it will stall but it will start right back up.
Please help I am stumped. I have done everything my Haynes manual has told me to and now I still have the problem and low on money help please.
GMC truck 5.7L pulsates at idle
Re: GMC truck 5.7L pulsates at idle
It sounds like you have a vacuum leak. A vacuum leak causes a lean condition (too much air- not enough gas) and will cause a fluctuating idle and stalling.
Spray some brake cleaner around- being sure to stay away from all ignition components. If a leak is found, the idle will surge up then down very noticeably.
Spray some brake cleaner around- being sure to stay away from all ignition components. If a leak is found, the idle will surge up then down very noticeably.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4 Replies
- 20991 Views
-
Last post by carriedi
Thu Nov 30, 2017 1:10 pm
-
- 1 Replies
- 11374 Views
-
Last post by carriedi
Fri Mar 18, 2016 10:46 am
-
- 3 Replies
- 6251 Views
-
Last post by carriedi
Sun May 14, 2017 7:07 pm
-
- 1 Replies
- 8755 Views
-
Last post by carriedi
Sat Oct 03, 2015 10:23 am
-
- 1 Replies
- 3503 Views
-
Last post by carriedi
Wed Sep 02, 2015 10:33 am