1995 Chevy 2500 4x4 Not Working

Post Reply New Topic
chevydiesel

1995 Chevy 2500 4x4 Not Working

Unread post by chevydiesel » Thu Sep 09, 2010 3:37 pm

I have a 95 2500 silverado and the 4 wheel drive stopped working. I replaced the actuator and checked wires and all was fine. The transfer case engaged and the drive shaft was spinning, but no front wheel movement.
Now today I heard some grinding coming from the front axle when I was driving to work (not in 4 wheel drive)
but it didn't last long. What could the problem be? Thanks.

Mechman

Re: 4x4 Not Working

Unread post by Mechman » Wed Sep 29, 2010 5:17 pm

If the drive shaft is turning but the wheels are not, then you have a front differntial internal problem. This would also explain the grinding.

protech

Re: 4x4 Not Working

Unread post by protech » Thu Dec 30, 2010 9:09 pm

You can check the fluid in the front differential, and if there is none, or if it metal colored you know you have a problem internally. If you replaced the actuator, you could have mis-aligned it while reinstalling and that would cause grinding while it is trying to engage and no 4WD.

Post Reply New Topic
  • Similar Topics
    Replies
    Views
    Last post