Chevy 2001 4.3 blazer hose melt
Chevy 2001 4.3 blazer hose melt
I own a 2001 Chevy blazer, 4.3 liter engine. The diagram I will attach will show the failure part but none seem available. I'm sure you have seen this before. Now the wiring harness has melted half way thru. Thanks for any suggestion on how to fix this.
- Attachments
-
- 2001blazer.jpg (145.92 KiB) Viewed 12673 times
Re: Chevy 2001 4.3 blazer hose melt
first thing is to replace the part numbered #9 in your diagram. that should be a one way check valve. When that valve goes bad it allows hot exhaust gases back into the rubber tube and that's why the rubber parts gets burned up over time.
because the parts are over 15 years now, it could be problematic to find the exact parts you need. Check with ACdelco online cataloging to see if you can find the correct parts you need. You may not be able to buy the parts that you need individually. It may come on a set of parts.
because the parts are over 15 years now, it could be problematic to find the exact parts you need. Check with ACdelco online cataloging to see if you can find the correct parts you need. You may not be able to buy the parts that you need individually. It may come on a set of parts.
Browse "SIMILAR TOPICS" At The Bottom Of This Page.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
New post 2001 Chevy 4.3 Blazer Trany stays in 2nd & speedo @ zero
by roy33 » Fri Jan 06, 2017 12:10 pm » in Chevy Blazer - 1 Replies
- 10146 Views
-
Last post by carriedi
Sat Jan 07, 2017 1:11 pm
-
-
- 3 Replies
- 17113 Views
-
Last post by carriedi
Sun Apr 17, 2016 1:44 pm
-
- 1 Replies
- 13438 Views
-
Last post by carriedi
Thu Dec 08, 2016 10:19 pm
-
- 6 Replies
- 11621 Views
-
Last post by b17b17b17
Tue Aug 15, 2017 11:09 am
-
-
New post code P0106 Blazer ENGINE RUNNING HEAVY
by DARKHARRIS » Tue Jan 05, 2016 1:29 pm » in Chevy Blazer - 1 Replies
- 7723 Views
-
Last post by tech3
Tue Jan 05, 2016 5:10 pm
-