code P0106 Blazer ENGINE RUNNING HEAVY
-
- Posts: 1
- Joined: Tue Jan 05, 2016 1:20 pm
code P0106 Blazer ENGINE RUNNING HEAVY
CHECK ENGINE LIGHT ON - CODE P0106 ENGINE RUNNING HEAVY AND STALLS WHILE IDLE REPLACED MAP SENSOR CLEANED THROTTLE BODY WHAT ELSE COULD BE WRONG
Re: code P0106 Blazer ENGINE RUNNING HEAVY
what year and I guess a 4.3L?
Vehicle is stock? no BS filters, chips, spacers.
no other codes- any?
Engine is reaching temp @195F?
This code is a rationality check for the mass air flow (MAF), manifold absolute pressure (MAP), and the throttle position (TP) sensors.
Do you have a scanner that sees live data?
If not - check for an air leak after the MAF, be sure the MAP has a good vacuum seal.
Vehicle is stock? no BS filters, chips, spacers.
no other codes- any?
Engine is reaching temp @195F?
This code is a rationality check for the mass air flow (MAF), manifold absolute pressure (MAP), and the throttle position (TP) sensors.
Do you have a scanner that sees live data?
If not - check for an air leak after the MAF, be sure the MAP has a good vacuum seal.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 13219 Views
-
Last post by carriedi
Thu Dec 08, 2016 10:19 pm
-
- 3 Replies
- 16771 Views
-
Last post by carriedi
Sun Apr 17, 2016 1:44 pm
-
- 6 Replies
- 11399 Views
-
Last post by b17b17b17
Tue Aug 15, 2017 11:09 am
-
-
New post 2001 Chevy 4.3 Blazer Trany stays in 2nd & speedo @ zero
by roy33 » Fri Jan 06, 2017 12:10 pm » in Chevy Blazer - 1 Replies
- 9980 Views
-
Last post by carriedi
Sat Jan 07, 2017 1:11 pm
-