507 code
Re: 507 code
has anyone tampered with the idle adjuster? They come sealed but many times people will remove the cap and adjust the idle setting and that may not let the computer make up for the throttle settings.
Normally, the computer sets the throttle to a predetermined position from fully closed. If the predetermined setting and the engine RPM do not match you will usually get a code.
Have you tried to use a scanner to control the Idle Air Control (IAC) Moving the rpm up and down? the scanner should allow you to tell the computer to set the rpm to a certain number and the computer should change the engine rpm to match the setting you tell it to go to.
How is the engine idling now?
What is everything? When you say you replaced everything.
When you reset the codes, when does the P0507 code come back? Does it come back on when you turn the key to the run position but don't start the engine yet? Does it wait until the engine is running? Does it come on right away when the engine starts or do it take some time before the code comes back?
Does your scanner show the parameters for the IAC and the rpm?
Did you have any other codes recently?
Normally, the computer sets the throttle to a predetermined position from fully closed. If the predetermined setting and the engine RPM do not match you will usually get a code.
Have you tried to use a scanner to control the Idle Air Control (IAC) Moving the rpm up and down? the scanner should allow you to tell the computer to set the rpm to a certain number and the computer should change the engine rpm to match the setting you tell it to go to.
How is the engine idling now?
What is everything? When you say you replaced everything.
When you reset the codes, when does the P0507 code come back? Does it come back on when you turn the key to the run position but don't start the engine yet? Does it wait until the engine is running? Does it come on right away when the engine starts or do it take some time before the code comes back?
Does your scanner show the parameters for the IAC and the rpm?
Did you have any other codes recently?
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 15629 Views
-
Last post by carriedi
Tue Apr 20, 2021 2:19 am
-
- 1 Replies
- 17447 Views
-
Last post by carriedi
Wed Apr 07, 2021 11:16 pm
-
- 3 Replies
- 7606 Views
-
Last post by carriedi
Wed Oct 01, 2014 3:37 pm
-
- 1 Replies
- 16802 Views
-
Last post by carriedi
Fri May 15, 2020 6:58 pm
-
-
New post 2006 Suburban 4wd Z71 Service stability code C0131
by mike6w » Sun Nov 01, 2015 8:17 am » in Chevy Suburban - 8 Replies
- 14798 Views
-
Last post by carriedi
Tue Nov 03, 2015 11:43 am
-