Camaro 1994 3.4 24x sensor
Camaro 1994 3.4 24x sensor
Hello, i have 1994 camaro v6. It starts and then after couple or more seconds (or if i press gas pedal) shuts off. Obd1 diagnostic shows 36 code for 24x crank sensor. I tried to test it with multimeter and it will not show any signs of life. All wires are good, sensor gets 12v ground and signal wire to pcm is okay also. I changed pcm and nothing changed. Changed crank sensor and nothing. Then i tried to put a3144 hall efect sensor but still no change. If you have any clue whats wrong please help!
Re: Camaro 1994 3.4 24x sensor
If you have a DVOM that has graphing capabilities you can check the 24x signal. hook up to the ckp(24X) wire and the other lead on the meter to a good ground. The three wire connector middle wire should be the 24x signal wire. light blue/white wire out of the crank sensor. Disable the fuel system so the engine won't start and watch the meter while cranking the engine.
here is a flow chart for checking for code 36 24x code.
here is a flow chart for checking for code 36 24x code.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 17912 Views
-
Last post by carriedi
Tue Feb 21, 2017 11:46 am
-
- 1 Replies
- 18282 Views
-
Last post by carriedi
Sat Aug 19, 2017 1:36 am
-
- 1 Replies
- 22719 Views
-
Last post by carriedi
Sat Dec 25, 2021 10:05 pm
-
- 1 Replies
- 15668 Views
-
Last post by carriedi
Wed Dec 10, 2014 11:42 am
-
-
New post 1993 Camaro Z28 no start or crank issue
by Icepitt2 » Sun Jan 16, 2022 11:45 am » in Chevy Cars - 1 Replies
- 22325 Views
-
Last post by carriedi
Mon Jan 17, 2022 4:26 am
-