2006 Chevy Uplander fuel pump issues be

From the Chevy Cavalier and Monte Carlo to the Malibu, Lumina and Impala.
Ask our auto mechanics for help to all your Chevrolet car questions now.
Post Reply New Topic
vbs52
Posts: 2
Joined: Sat Feb 16, 2013 9:41 am

windshield rattles

Unread post by vbs52 » Sat Feb 16, 2013 9:43 am

have Chevy Malibu 05, had front windshield replaced, and now have a rattle down at the bottom. The man who replaced it came and took it off and put it back on. Still rattles. Why? Suggestions on how to get rid of noise.
vbs

 

User avatar
ProTech
Posts: 657
Joined: Wed Oct 17, 2012 10:08 am

Re: windshield rattles

Unread post by ProTech » Sat Feb 16, 2013 3:42 pm

If it didn't rattle before, it's obviously something the guy who replaced the windshield did. Either a trim piece came loose, or something around the cowl area is rattling. Try banging around on the glass to locate the area of the rattle and point it out to him. Should be an easy find and fix! Otherwise, you'll just have to deal with the noise.
GM Dealer Technician For 18+ Years
In the automotive industry for 20+

Jay1950
Posts: 1
Joined: Fri Aug 24, 2018 4:36 pm

2006 Chevy Uplander fuel pump issues be

Unread post by Jay1950 » Fri Aug 24, 2018 5:03 pm

I have a 2006 Chevy Uplander fuel pump issues we have replaced the pump and the four wire plug at the pump and up graded the gro
und.The pump will pump before we reinstall it but it won't pump when reinstalled. Any help will be appreciated.

User avatar
carriedi
Posts: 2279
Joined: Wed Apr 10, 2013 12:42 pm
Location: Oregon

Re: 2006 Chevy Uplander fuel pump issues be

Unread post by carriedi » Sat Aug 25, 2018 12:27 pm

your fuel pump wire harness has two wires that power up your fuel pump. the gray wire is the power from the fuel pump relay and the black wire is for the ground. You need to verify that you are getting a good power signal and ground signal. if you connect the two wires to a test light then you could see if the test light lights up when the fuel pump should come on. You can check to see if the relay in the underhood fuse box is clicking to turn on the pump.

check the fuel pump fuse #2 a 15A fuse. the relay appears to be made into the fuse box because the wiring diagram does not show connector pins but verify that by looking at you owners manual for the fuses and relays and see, if it shows the fuel pump relay location and then if it is available, the relay is working. The ground for the relay is the ground stud at the engine to transmission bolts. Power to activate the relay comes from the computer.
Browse "SIMILAR TOPICS" At The Bottom Of This Page.

Post Reply New Topic
  • Similar Topics
    Replies
    Views
    Last post