Hard shifting 1st an 2nd gear code P0010

[Lesfry86]

So I'm 99% it's the connector that plugs in to the magnet jacked her up an what do you know the wires to that plug are some what bare going to get some shrink wrap tubes an wrap them up good should solve my problem I must say thoe that chevy did a pretty shitty job routing that plug they ran the wire rite thru the serpentine belt positive that's what caused the damage to the wires rubbing against the belt would have never thought they would run it that way. An I did check this wire before purchasing the magnet you just can't see the damage from the top have to go from underneath wish I would have before I spent the 120 the magnet most likely didn't even need a new one will update as soon as I make this fix an let you know the results. I am also going to check all other plugs and wire harness underneath while I'm down there just to double check the rest of chevy geniuses wire routing makes no sense at all.

[Lesfry86]

Problem solved!!!!!!!! Thanks a lot Carriedi appreciate the help will definitely be using this site for future problems hopefully I have none though. Lol