Hi,
Waiting for approval of my registration -- gmail is slow today I guess.
TOPIC: bought Rockford Fosgate 10" Sub w/ built in 300 w amp. Crutchfield confirmed this will work with my deck and speakers. (Specifics listed below)
I'm pretty comfortable attempting to do the install, but I'm definitely better at doing something for the very first time with images instead of just written instructions. So, if anyone out there wants to help me with this project by sending me pictures of the areas where I will be running wires at or thru and where to mount the inline fuse holder under the hood, etc., then please reply.
You get what I'm asking I hope. Anyone wanna help? Please have experience. I'll Venmo you a lil thank you. Will check back every 10 minutes or so for replies. Thank you.
SPECIFICS:
99 Grand Prix Coupe GTP Supercharger
Pioneer DEH S7200BHS ___came with car
Kicker 46CSC54 Door Speakers 5 1/4" ___ brand new
Kicker 46CSC6934 Rear Speakers 6 x 9___brand new
Rockford Fosgate Punch 10" Sub w/ built in 300w amp___ brand new & not installed
Rockford Fosgate 8 AWG Amp Install Kit___brand new & not installed
Want suggestions where to run wires to 10" Sub
Re: Want suggestions where to run wires to 10" Sub
what wires do you think you need to run? Didn't your car come with factory wiring for everything except the subs? you should be able to use the factory wiring for the radio, speakers and amp.
for info:
https://www.crutchfield.com/car/solution/kitfinder.aspx
(look at the "See all 6 notes" on that page also)
https://www.crutchfield.com/g_182850/Ki ... et%20rated
Subs:
https://www.youtube.com/watch?v=21QM2hbFtgc&t=223s
for info:
https://www.crutchfield.com/car/solution/kitfinder.aspx
(look at the "See all 6 notes" on that page also)
https://www.crutchfield.com/g_182850/Ki ... et%20rated
Subs:
https://www.youtube.com/watch?v=21QM2hbFtgc&t=223s