CrNk shaft sensors

Thaynes
Posts: 1
Joined: Mon Jun 05, 2017 12:04 pm

CrNk shaft sensors

Unread post by Thaynes » Mon Jun 05, 2017 12:10 pm

Where are the crank shaft sensors located and how to instAll them both i have a 2003 Gran prix with 3.1 engine

User avatar
carriedi
Posts: 2573
Joined: Wed Apr 10, 2013 12:42 pm

Re: CrNk shaft sensors

Unread post by carriedi » Tue Jun 06, 2017 11:18 am

ckp sensor "a" is located on the left side of the motor behind the harmonic balancer. the connector should be right next to the AC compressor
ckp sensor "b" is located on the lower right side below the exhaust manifold.

crank sensor "b" is the 7x sensor the goes into the side of the engine. It has one bolt. Unplug the sensor. remove the one bolt. then switch out the sensor. Lube the O ring on the new sensor to make it easier to go into the engine.

crank sesnor "a" is the 24x sensor. you remove the harmonic balancer to access the sensor.
https://www.youtube.com/watch?v=6nGE1YxUNWM
Browse "SIMILAR TOPICS" At The Bottom Of This Page.

  • Similar Topics
    Replies
    Views
    Last post