engine swap 3.1L to 3.4L

Post Reply New Topic
soultekk

engine swap 3.1L to 3.4L

Unread post by soultekk » Mon May 03, 2010 4:37 am

WAT DO I HAVE TO DO TO PUT IN A 3.4 FRM A GTP INTO A GP-SE THAT HAS A 3.1.

 

SOULTEKK

ENGINE SWAP

Unread post by SOULTEKK » Mon May 03, 2010 4:45 am

WAT DO I NEED TO DO AND KNOW??I NEED TO PUT A 3.4 FROM A 96 PONT. GTP, INTO A 96 PONT. GP-SE W/3.1

willwildy
Posts: 20
Joined: Fri Aug 13, 2010 10:59 pm
Location: thailand, washington state or florida
Contact:

Re: ENGINE SWAP

Unread post by willwildy » Fri Aug 13, 2010 11:59 pm

Why would you want to?

Next thing you need to know is don't. You want a bigger motor sell your car and buy one with a bigger motor.

Bill
Click here to make a SMALL DONATION to HELP KEEP US FREE

willwildy
Posts: 20
Joined: Fri Aug 13, 2010 10:59 pm
Location: thailand, washington state or florida
Contact:

Re: engine swap

Unread post by willwildy » Mon Aug 23, 2010 6:25 am

Dude you should watch the "red green" show. Your talking about 300 cc's more engine. There is no way what you want to do makes sense. Want a bigger engine? Sell your car with the small engine and buy a car with a bigger engine.
Click here to make a SMALL DONATION to HELP KEEP US FREE

User avatar
butchkaz
Site Admin
Posts: 175
Joined: Wed Nov 18, 2009 6:13 pm
Contact:

Re: ENGINE SWAP

Unread post by butchkaz » Wed May 22, 2019 10:42 pm

Mechanically everything from the 3.1L to the 3.4L will bolt up just fine. There will be some slight differences in wiring harness routing, but most of the sensors will just plug right in. The major problem is that you would have to swap the PCM also, then relearn the theft system.
Be Sure To Check The Related Topics below For More Help.

Post Reply New Topic
  • Similar Topics
    Replies
    Views
    Last post