Pontiac grand am dtc p1606
-
- Posts: 1
- Joined: Wed Jul 03, 2013 8:41 am
Pontiac grand am dtc p1606
I have a 1996 Pontiac grand am with the 2.4 l motor does not start cranks only pulled dtc code p1606 motor has no spark and fuel pressure is soso when cranking security comes on and does not go out where to I go to fix the problem ipc gas gauge is full
Re: Pontiac grand am dtc p1606
if the security light is coming on the car may not start because of the anti-theft module. you may have to see if you can relearn your key. Scan for codes in the passlock with a tech2 scanner
p1606 is for a serial communication loss for device #6
that means that a device that the pcm is looking for is not responding. the pcm did not get a 25 valid responses from a device and the system voltage was over 6.8 volts. Need to find out what is not communicating.
p1606 is for a serial communication loss for device #6
that means that a device that the pcm is looking for is not responding. the pcm did not get a 25 valid responses from a device and the system voltage was over 6.8 volts. Need to find out what is not communicating.
Browse "SIMILAR TOPICS" At The Bottom Of This Page.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4 Replies
- 13832 Views
-
Last post by BryanDee
Sat Mar 03, 2018 1:01 am
-
- 1 Replies
- 25044 Views
-
Last post by carriedi
Wed Mar 24, 2021 1:11 am
-
- 1 Replies
- 19507 Views
-
Last post by carriedi
Wed Jul 22, 2020 10:56 pm
-
- 1 Replies
- 17799 Views
-
Last post by carriedi
Wed Apr 22, 2020 8:02 am
-
-
New post Problems with 1999 Pontiac Grand Am GT 3.4L V6
by Roshambobobo » Thu Oct 09, 2014 6:11 am » in Pontiac Grand Am - 6 Replies
- 11558 Views
-
Last post by carriedi
Sat Apr 01, 2017 8:15 pm
-