replacing all brake lines on 2005 rendezvous awd
replacing all brake lines on 2005 rendezvous awd
need to know which line goes in to what port on abs module a simple diagram clearly labeled would be nice
Re: replacing all brake lines on 2005 rendezvous awd
your abs pump isn't marked like this one? see where it's marked RF, LF, RR, LR?
have you already taken off the lines? you could look and trace them to where they go. two go to the front and should be two go to the rear. You just have to disconnect one front and one rear line at the pump and disconnect the line at one of the front wheels and one of the rear wheel and see if you can blow air through the line. (low pressure) If the rear line allows brake fluid through then mark for that wheel. If brake fluid doesn't go out then it's for the other wheel. Do the same for the front.
have you already taken off the lines? you could look and trace them to where they go. two go to the front and should be two go to the rear. You just have to disconnect one front and one rear line at the pump and disconnect the line at one of the front wheels and one of the rear wheel and see if you can blow air through the line. (low pressure) If the rear line allows brake fluid through then mark for that wheel. If brake fluid doesn't go out then it's for the other wheel. Do the same for the front.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 7958 Views
-
Last post by carriedi
Sun Jan 22, 2017 2:45 pm
-
- 1 Replies
- 6814 Views
-
Last post by ProTech
Thu May 09, 2013 5:47 pm
-
-
New post Can't get my car started after replacing my blown engine
by krs.malardo » Fri Aug 02, 2013 1:22 am » in Buick - 3 Replies
- 4485 Views
-
Last post by carriedi
Sun Aug 04, 2013 5:11 am
-
-
- 1 Replies
- 7045 Views
-
Last post by carriedi
Tue Feb 16, 2016 3:31 am
-
- 1 Replies
- 7526 Views
-
Last post by ProTech
Tue Feb 26, 2013 7:59 pm