GreatAutoHelp.com Car Forums
http://www.greatautohelp.com:443/forums/

my 2002 buick lesabre ABS Traction
http://www.greatautohelp.com:443/forums/viewtopic.php?f=12&t=7070
Page 1 of 1

Author:  Deniene29 [ Mon Apr 06, 2015 5:50 am ]
my 2002 buick lesabre ABS Traction

I hit a very large pothole and my "abs" light and traction control off light came on. Now it's telling Me system needs stability. I don't know what to do.

Author:  carriedi [ Mon Apr 06, 2015 5:56 pm ]
Re: my 2002 buick lesabre ABS Traction

you need to have your anti-lock brake module scanned. You may have set a code when you hit the pothole if the wheel speed changed from what the other three wheels were reading. You may have damaged a wheel speed sensor or wiring.

if you hook up to a scanner you can see what the code is and you can drive the car and watch the wheel speed sensors to see if one of them isn't working as the others.

when the abs or traction lights come on it means that these systems have seen a code and are now disabled. Normal braking should still be ok. Key word there is "should". I don't know how big that pothole was...

Author:  Deniene29 [ Tue Apr 07, 2015 3:52 am ]
Re: my 2002 buick lesabre ABS Traction

Everything seems to be working just fine breaks squeak a little. Seeing the lights on really bothers me. Where can I go to have the code read.

Author:  carriedi [ Tue Apr 07, 2015 8:24 pm ]
Re: my 2002 buick lesabre ABS Traction

Almost any auto repair shop would have a scanner that could look at the codes and let you know what is turning the light on. Some auto parts places will scan your vehicle for free because they want to sell you parts but most of the time they don't know what the codes really mean. Unless the code simply syates a part is damaged, there will be some diagnostic time involved in figuring out why the light came on.

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/