1997,Chevy,Lumina, 3.1 Liter
Dear JK:
Hey, I recently wrote you about how i could get my radio out of my
lumina, after a hell lot of work I finnaly was able to start working on it
yesterday. But a problem came up I got the old radio out and the new
(not a factory, but one of those walmart ones) in, the CD's played great
and all features worked perfectly. Therefore my wiring is ok
(speakers,power,etc...) But the radio didn't play. I tryed several adapters and
even put the old one back in and tryed to see if it works with the
radio. It did. Now I think the problem is that i didn't unlock my old radio.
i do have the unlock Key for it and even the procedure. Only problem
is it doesn't make any sense to me. I says I'm supposed to hold the hrs
button untill I for the first 2 digits (14) and the min button till the
2nd digits appear (94). Then I am supposed to hold the AM/FM button
till SEC appears. I tyred several varioations but norhing works. What is
the correct way of doing it?
JK:
It should not matter if you unlocked the readio at all for the new radio to function. Sonds like
new radio's antena cable maybe not be in correctly, or the incorrect adapter for the antana
(if it has one.) Possibly a malfunctioning radio. All of the radio lock functions and logic are
internal to the radio and should have no affect on a non-gm radio. Try this procedure if you
wish.....
Unlocking/ deactivating unit with back-up code or customer code - with battery and ignition
voltages applied and radio power off.
Press the HR button until the LOC disappears and OOO appears on the display. Note: If
the display does not change from LOC to 000 the unit is probably in the InOP stage, see
Step G.
Set the first two digits (01-19) of the code with HR (hours) button.
Note: As if you’re setting the time of day you will not see the 0 in the far left side. Example; if
the first two digits of your code is 02 you will scroll with the HR button until 2 appears on the
display.)
Set the next two digits (00-99) of the code with the MIN (minute) button.
Press the AM-FM button to enter the code. The radio will now be unlocked and the display
will change to the clock. Continue with the following steps to deactivate the theft deterrent.
Press the HR button until display changes 000.
Repeat steps 2-4 above to remove previous code and deactivation the theft deterrent
system.
If you dont have a code, i can show you how to get factory back-up code which will unlock
radio.
Back
Dear JK:
Hey, I recently wrote you about how i could get my radio out of my
lumina, after a hell lot of work I finnaly was able to start working on it
yesterday. But a problem came up I got the old radio out and the new
(not a factory, but one of those walmart ones) in, the CD's played great
and all features worked perfectly. Therefore my wiring is ok
(speakers,power,etc...) But the radio didn't play. I tryed several adapters and
even put the old one back in and tryed to see if it works with the
radio. It did. Now I think the problem is that i didn't unlock my old radio.
i do have the unlock Key for it and even the procedure. Only problem
is it doesn't make any sense to me. I says I'm supposed to hold the hrs
button untill I for the first 2 digits (14) and the min button till the
2nd digits appear (94). Then I am supposed to hold the AM/FM button
till SEC appears. I tyred several varioations but norhing works. What is
the correct way of doing it?
JK:
It should not matter if you unlocked the readio at all for the new radio to function. Sonds like
new radio's antena cable maybe not be in correctly, or the incorrect adapter for the antana
(if it has one.) Possibly a malfunctioning radio. All of the radio lock functions and logic are
internal to the radio and should have no affect on a non-gm radio. Try this procedure if you
wish.....
Unlocking/ deactivating unit with back-up code or customer code - with battery and ignition
voltages applied and radio power off.
Press the HR button until the LOC disappears and OOO appears on the display. Note: If
the display does not change from LOC to 000 the unit is probably in the InOP stage, see
Step G.
Set the first two digits (01-19) of the code with HR (hours) button.
Note: As if you’re setting the time of day you will not see the 0 in the far left side. Example; if
the first two digits of your code is 02 you will scroll with the HR button until 2 appears on the
display.)
Set the next two digits (00-99) of the code with the MIN (minute) button.
Press the AM-FM button to enter the code. The radio will now be unlocked and the display
will change to the clock. Continue with the following steps to deactivate the theft deterrent.
Press the HR button until display changes 000.
Repeat steps 2-4 above to remove previous code and deactivation the theft deterrent
system.
If you dont have a code, i can show you how to get factory back-up code which will unlock
radio.
Back
| Was this information helpful? Is this what you have been searching for? Why not make a small donation to help keep us going. The guys work hard everyday to try and help people like you searching for help on the web. LEARN HOW |
