All times are UTC - 6 hours [ DST ]




Ask A Question Reply   
Author Message
 

contributions: 5
what causes 1999 Honda odyessy to vibrate at idle and grinding noise,after the oil seal,waterpump and timing belt was replaced?


Share on FacebookShare on DiggShare on DeliciousShare on TechnoratiShare on TumblrShare on Google+
   
Reply with quote  
* Search   
 
User avatar

contributions: 2088
Images: 37
Location: Oregon
who did the oil seal and water pump? have you taken it back to them and asked if they would check out your concerns? if it didn't do that before the work was done maybe something is off. double check the timing belt alignment. Idle too low, belt off a tooth, bad engine mount are things that could cause a vibration at idle. Grinding would be something rubbing or dragging. A bad part? Sometimes even a new part can be bad... Here is an example:

https://www.youtube.com/watch?v=dJJujul ... Y0wF2o5WUw

Not saying this is what is wrong with your car but you should have it checked by the person or place that did your work before you do anything else.


   
Reply with quote  
 

contributions: 5
carriedi,thankyou for the response,exactly my thoughts,are goin to recheck all at the garage,thanks,naf


   
Reply with quote  
 

contributions: 5
seems the problem was the tension on the timing belt,new arm and pulley ,put Honda part in ,so far so good


   
Reply with quote  
 
User avatar

contributions: 2088
Images: 37
Location: Oregon
I'm happy that they found out what was making the noise for you. Like the video I posted, sometimes things just happen


   
Reply with quote  
 

contributions: 22
Quote:
I'm happy that they found out what was making the noise for you. Like the video I posted, sometimes things just happen


yeah right, things just happened. I'm glad to know it's working good!


   
Reply with quote  
 

contributions: 5
Grinding - Stop driving! Usually caused by a lack of brake pad.
Thumping from rear - Hard to diagnose, but usually the rear drums.
Squeaking - Either cheap brake pads or break wear indicator is hitting rotor.
Thumping or squealing - If car is parked outdoors, probably caused by rusted rotors.
Scraping - You may have picked up a rock.

_______________________
http://www.manassaslimo.com/


   
Reply with quote  
Ask A Question Reply   

   Similar Topics   Author   Replies   Views   Most Recent 
New Articles View the first 2003 Chevy grinding noise

in Chevy Silverado

jwcarter2006

1

1373

Thu Dec 18, 2014 11:27 am

carriedi View the latest

New Articles View the first Avalanche chassis harmonic vibration

in Chevy Avalanche

tangible

6

948

Wed Feb 03, 2016 5:36 pm

carriedi View the latest

New Articles View the first 2001 GMC sierra 1500 4x4 vibration in floor when acceleratin

in GMC Trucks

shackleferd33

1

1189

Wed Nov 25, 2015 1:51 am

carriedi View the latest

New Articles View the first 2001 Impala grinding at specific RPM

in Chevy Cars

impala01

1

1438

Mon Dec 29, 2014 4:37 pm

carriedi View the latest

New Articles View the first Noise in front end when turning

in Chevy Cars

califbnd

3

1496

Sun Feb 15, 2015 4:39 pm

carriedi View the latest

New Articles View the first buzzing noise Ford F-150

in Ford Trucks

eurocycles2010

2

1896

Sun Dec 25, 2016 7:30 pm

herbivore View the latest

New Articles View the first FRONT END GMC Yukon noise turning right

in GMC Trucks

charger49

2

1426

Tue Dec 20, 2016 1:18 pm

Guest View the latest


All times are UTC - 6 hours [ DST ]



Search for:
Jump to:  
Contact Us