Quantcast




All times are UTC - 6 hours [ DST ]




Ask A Question Reply   
Author Message
 

contributions: 1
I cannot find the torque specs for a lower control arm on an '08 Saturn aura 3.5L. I'm also curious how the rear bushing works when the
bolt is tightened. If it locks the bushing in place, how does the arm pivot with the up and down movement of the suspension?


Share on FacebookShare on DiggShare on DeliciousShare on TechnoratiShare on TumblrShare on Google+
   
Reply with quote  
* Search   
 
User avatar

contributions: 1990
Images: 37
Location: Oregon
ok, I am guessing you are looking for the torque specs for a lower control arm in the rear suspension then.

Lower control arm to support bolt/nut is 81 ft/lb.

Here's the thing, it should be tightened and torqued with the weight of the car on it. (or the at rest position) It's best to has the alignment place adjust it and then tighten it while it's still on the alignment rack.

When you tighten the bolt it will lock the metal sleeve of the bushing between the bracket. It should not be able to move after it tightened up. When the control arm bounces up and down the rubber part will twist and absorb the shock then return to it's at rest position ready for the next bump. If you tighten the bushing bolt with the suspension hanging down it will put the bushing under a load as soon as you lower the car down. The weight of the car will twist the bushing and then when you go over bumps you will be over working the rubber bushing. It will still work but it will wear out much faster.


Attachments:
saturn rear arm.jpg
saturn rear arm.jpg [ 132.02 KiB | Viewed 1181 times ]
   
Reply with quote  
 

contributions: 1
So your knowledge and experience are very useful. I greet you. http://lan-utan-uc-se.com/


   
Reply with quote  
Ask A Question Reply   

   Similar Topics   Author   Replies   Views   Most Recent 
New Articles View the first 2004 Yukon 1500 XL Denali suspension air dryer

in GMC Trucks

rhsou

6

222

Sun May 21, 2017 1:07 am

carriedi View the latest


All times are UTC - 6 hours [ DST ]



Search for:
Jump to:  
Contact Us