heaters not working

Ask our auto mechanics for help to all your Dodge and Chrysler questions.
sparky
Posts: 1
Joined: Mon Oct 20, 2014 10:37 pm

heaters not working

Unread post by sparky » Mon Oct 20, 2014 10:50 pm

my 98 town & country wont push hot water thru the heater core, Iv'e plugged the return side, and run the engine till I got hot water out the return hose. then I hooked it back together, and got heat. I let the car cool down and restarted the engine, let it get up to running temp and no heat from the heater, both hoses were cold going into the core and out. Has anyone got anyone got any ideas? oh and nomatter what I do I cant get any heat out of the rear heater. please help!!

User avatar
carriedi
Posts: 2573
Joined: Wed Apr 10, 2013 12:42 pm

Re: heaters not working

Unread post by carriedi » Tue Oct 21, 2014 10:06 am

you might want to check the performance of your water pump. the impeller may not be doing it's job.

when you took off the hose for the heater and ran the engine, how much coolant was coming out? Should have been a lot.
Browse "SIMILAR TOPICS" At The Bottom Of This Page.

raneger
Posts: 22
Joined: Sun Mar 01, 2015 12:47 am

Re: heaters not working

Unread post by raneger » Sun Jun 14, 2015 3:39 pm

Probably you reconnected the tubes in the heater? and if you put on the heater is there air coming out or nothing at all?

  • Similar Topics
    Replies
    Views
    Last post