I have a 2009 ford explorer that will not crank over All dash lights are on turn key nothing Security light is blinking fast tried reset the key using ford procedure using door then ignition switch Checked all fuses and breakers every thing is good tried using cheap code reader but reader says it cant find car but reader works in other car Could reader plug be dead also
please help
thank you Bob
2009 ford explorer wont crank
Re: 2009 ford explorer wont crank
with the security light flashing I would try another key and see what happens. most code readers are for engine codes. security codes are from a different module. Find a scanner that does more than a code reader. See if you have pats codes stored. you might have to reprogram your keys to your car.
you can test your starter relay and it's operation in the battery junction box on the left side fender apron. and fuses 11 (30A) fuse 3 (50A) and fuse 8 (15A) making sure they are all good. Check the neutral safety switch and ignition switch. All of these can cause a no crank condition but NONE of these would cause the security light to flash.
so, scan the pats module and let me know what you find out
you can test your starter relay and it's operation in the battery junction box on the left side fender apron. and fuses 11 (30A) fuse 3 (50A) and fuse 8 (15A) making sure they are all good. Check the neutral safety switch and ignition switch. All of these can cause a no crank condition but NONE of these would cause the security light to flash.
so, scan the pats module and let me know what you find out
-
- Similar Topics
- Replies
- Views
- Last post
-
- 7 Replies
- 11012 Views
-
Last post by carriedi
Sat Sep 20, 2014 11:39 pm
-
- 3 Replies
- 10768 Views
-
Last post by carriedi
Thu Feb 25, 2016 11:42 am
-
- 1 Replies
- 9512 Views
-
Last post by carriedi
Fri Oct 02, 2015 3:01 am
-
-
New post Ford 2010 explorer 4.0 overheating when not accelerating
by Gildave » Mon Jul 18, 2016 5:10 pm » in Ford Trucks - 1 Replies
- 9796 Views
-
Last post by carriedi
Mon Jul 18, 2016 8:28 pm
-
-
-
New post 2010 Ford Explorer overheating when accelerating, no heat
by csylvia02 » Sat Dec 06, 2014 6:14 pm » in Ford Trucks - 2 Replies
- 6274 Views
-
Last post by dhdishner
Wed Dec 31, 2014 8:36 pm
-