2000 f250 5.4 4x4 won't engage

Ask our auto mechanics for help to all your Ford truck questions now.
Rockytruck
Posts: 1
Joined: Tue Dec 24, 2013 2:24 am

2000 f250 5.4 4x4 won't engage

Unread post by Rockytruck » Tue Dec 24, 2013 2:33 am

Put in 4 high light says in 4x4and will move but its not in 4x4 when put in 4 low its like putting truck in neutral is five speed with manual. Hubs don't matter what gear just revs but light stays on in either one like suppose to if it was workin any idea what it is

User avatar
carriedi
Posts: 2573
Joined: Wed Apr 10, 2013 12:42 pm

Re: 2000 f250 5.4 4x4 won't engage

Unread post by carriedi » Tue Dec 24, 2013 5:53 pm

check for a vacuum leak
Browse "SIMILAR TOPICS" At The Bottom Of This Page.

btgrimm
Posts: 1
Joined: Tue Aug 19, 2014 10:51 am

1999 ford truck only goes in reverse

Unread post by btgrimm » Tue Aug 19, 2014 10:59 am

My trans is making a bad grinding sound in the bellhousing area and the fluid is burnt.won't go in any gear but reverse.overdrive light was flashing before it went out. Some one said it was a bad torque converter

User avatar
carriedi
Posts: 2573
Joined: Wed Apr 10, 2013 12:42 pm

Re: 1999 ford truck only goes in reverse

Unread post by carriedi » Tue Aug 19, 2014 12:23 pm

that's kind of what it sounds like. but the grinding could be sending debris through the trans. you should take it to a tranny shop and have it checked out
Browse "SIMILAR TOPICS" At The Bottom Of This Page.

  • Similar Topics
    Replies
    Views
    Last post