Re: I need help with my gmc enovy
ok, your starter is new. Is it cranking the engine when you put the key in the start position? Is the starter doing it's job of making the engine spin?
if the engine is not turning over when the key is in the start position then you have a problem with the starter circuit.
it the starter is turning the engine over but the engine is not starting that is another problem.
if the engine is turning over and sometimes seems like it is going to start but then doesn't and the security
light is on, you may have a problem where the security
system does not see the signal from the key to allow the fuel injector pulse to continue when you release the key to the run position.