2004 GMC Envoy P0410 Trouble Code
2004 GMC Envoy P0410 Trouble Code
This trouble code keeps coming up on my Envoy. Reading information about this code points to the pump not coming on as the primary problem. The pump comes on when the ignition switch is turned on so I'm at a loss as to what to do to repair this problem.
Re: 2004 GMC Envoy P0410 Trouble Code
the secondary air injection pump is designed to reduce exhaust emissions after initial engine start up. The computer does a test by turning things on and off to see if it's working like it should. It sees when it's working by looking at the oxygen sensor reaction. It wants to see the O2 sensor drop below 150mv. If the pcm doesn't see the correct drop it sets the code.
check the pump operation (key on engine off, turn the pump on and you should hear it come out the exhaust). Disconnect the hoses and check for water. Check the shut off valve, make sure it is opening and closing completely, they can get gunked up. Also check the O2 sensor operation. The O2 sensor is a common problem for this code too.
check the pump operation (key on engine off, turn the pump on and you should hear it come out the exhaust). Disconnect the hoses and check for water. Check the shut off valve, make sure it is opening and closing completely, they can get gunked up. Also check the O2 sensor operation. The O2 sensor is a common problem for this code too.
Browse "SIMILAR TOPICS" At The Bottom Of This Page.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 10893 Views
-
Last post by carriedi
Tue Jan 26, 2016 11:31 am
-
- 1 Replies
- 5110 Views
-
Last post by carriedi
Tue Sep 23, 2014 10:25 am
-
- 4 Replies
- 7257 Views
-
Last post by carriedi
Wed Jun 03, 2015 9:00 pm
-
- 1 Replies
- 3856 Views
-
Last post by carriedi
Wed Sep 03, 2014 1:27 am
-
- 2 Replies
- 7327 Views
-
Last post by heavyjets
Tue Jun 02, 2015 12:50 pm