Pontiac grand am dtc p1606
-
- Posts: 1
- Joined: Wed Jul 03, 2013 8:41 am
Pontiac grand am dtc p1606
I have a 1996 Pontiac grand am with the 2.4 l motor does not start cranks only pulled dtc code p1606 motor has no spark and fuel pressure is soso when cranking security comes on and does not go out where to I go to fix the problem ipc gas gauge is full
Re: Pontiac grand am dtc p1606
if the security light is coming on the car may not start because of the anti-theft module. you may have to see if you can relearn your key. Scan for codes in the passlock with a tech2 scanner
p1606 is for a serial communication loss for device #6
that means that a device that the pcm is looking for is not responding. the pcm did not get a 25 valid responses from a device and the system voltage was over 6.8 volts. Need to find out what is not communicating.
p1606 is for a serial communication loss for device #6
that means that a device that the pcm is looking for is not responding. the pcm did not get a 25 valid responses from a device and the system voltage was over 6.8 volts. Need to find out what is not communicating.
Browse "SIMILAR TOPICS" At The Bottom Of This Page.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4 Replies
- 13726 Views
-
Last post by BryanDee
Sat Mar 03, 2018 1:01 am
-
- 1 Replies
- 25031 Views
-
Last post by carriedi
Wed Mar 24, 2021 1:11 am
-
-
New post 2003 Pontiac Grand AM V6 3.4 Overheating
by ronrw2b2 » Sat Jul 09, 2016 5:45 pm » in Pontiac Grand Am - 4 Replies
- 16283 Views
-
Last post by richpart
Fri Aug 24, 2018 3:23 pm
-
-
-
New post 2002 Pontiac Grand Prix GTP
by jwm69chevy » Thu Nov 20, 2014 10:05 pm » in Pontiac Grand Prix - 5 Replies
- 15080 Views
-
Last post by Jessycarpenter
Tue Mar 28, 2017 9:30 am
-
-
-
New post Problems with 1999 Pontiac Grand Am GT 3.4L V6
by Roshambobobo » Thu Oct 09, 2014 6:11 am » in Pontiac Grand Am - 6 Replies
- 11510 Views
-
Last post by carriedi
Sat Apr 01, 2017 8:15 pm
-